sleeping princess dragon

A sleeping princess dragon design was chosen by my spunky 7 yr old grand-daughter for a quilt.  The instructions in the pattern are for a pieced quilt (in a language I don't speak or understand and this old dog does not learn new language tricks)

Pattern sourced in the stats.  

The following is a detailed documentation of the process used to create this quilt.  

Pattern design enlarged, details in the stats.

Patterns made with Golden Threads Quilting Paper from the enlarged pattern design.

Templates made with freezer paper, 4 layers thick, from the patterns above.

The pieced background top was made with 6" cut squares.

Half square triangles, 2 1/2" finished, for the body of dragon, making sure it covers the footprint of the dragon design. 

1/2 square triangles are bulky where seams come together ... CLIP, stopping before the seam.

Instructions for this next part of construction are not documented (only in my head :)  At night, lay in bed with closed eyes and determine the next step. That's how you do it :)

Throughout the construction process, support snacks are highly recommended (Pirates Booty are the current RX of choice.  For additional support, add some form of "milk" chocolate with nuts and frequent rest periods)

Using the pattern pieces made with the Golden Thread paper and a water erasable pen, mark the footprint (blue line in photo) of the dragon onto the right side of the back-ground piece.  Roughly pin dragon piece, right side up, onto the back of back-ground piece. Check to make sure the dragon piece on the back is bigger than the footprint drawn on the top.  

Adjust as needed, making sure the hst dragon piece on the back is an inch larger than the marked footprint. Adjustments may include adding more hst to the dragon.

Sew the dragon and back-ground pieces together, with a tiny stitch length (1.5) on the blue footprint line previously marked.  While sewing this part, the dragon piece on the back will not be visible. (refill of chocolate support highly recommended at this point)    

After sewing the dragon onto the white background, trim  1/4" from the inside of the stitching line with small, sharp scissors, pulling away pieced background, revealing the dragon previously attached to the back.  

Sew the underbelly piece of the dragon onto the hst piece.  Appliqué remaining dragon body parts onto the top of dragon.  (I chose to turn the edges under for a contrast) 

Congratulations, you now have a new quilt top. (a celebratory reward is in order!)

DO NOT CLIP RAW EDGES AT THIS POINT.

Adhere new quilt top to batting.  DO NOT INCLUDE THE BACKING AT THIS POINT, it will be added later.  With matching thread, quilt wings and scales with a match-stick quilting design. (see "quilting line-up" info below)

 Free-motion quilted with an HQ Sweet Sixteen.

Study the details of the following quilting order before starting. 

DO NOT WASH QUILT BEFORE THE INDICATED TIME.

Quilting order:

After quilting with a match-stick design onto the wings and scales, attach backing to quilt top/batting.

Quilt the outline of all dragon pieces.

Stitch-in-the-ditch the 1/2 square triangles.

Quilt a small meander pattern over the background.

Look on the back at this point to make sure there are no large unquilted areas.  

Free-motion quilt any additional details.

Always wear your invisible crown

"Always wear your invisible crown" was quilted along the top of the quilt in a thread that will blend in.

Sew 2 layers of chenille for the mouth and eyelashes with a 1.5 stitch length. 

Using small, sharp scissors, clip raw edges making sure not to clip into the stitching.

Zigzag around the edges of the quilt.

WASH QUILT.  

Additional washing/drying will help to fray the raw edges and chenille.  

(A celebration w/ treats are now in order as you feel the excitement of your crinkled quilt coming out of the dryer.  Traditionally this process is done during the late night/early morning hours. :)

Add embellishments.   

A trip to the craft store with the future owner/grandchild of this quilt to pick out supplies for the tiara was in order.  (in an attempt to create a special memory with this grandchild and her Nana)

A BIG button for the tiara was chosen :)

( .......more creative construction to invent :)

In order to remove the button for washing, create a button hole through the quilt.  Attach jean pocket to the back of quilt over the button hole.

stats:

68 x 83 washed

Pattern adapted from Dragon Dreams for Apples and Beavers, created by Astrid Bordush.

Fabric of dragon body is Spotted Graffiti designed by Marcia Derse for Wyndham Fabrics. 

Background squares - 9 fabrics, 18" by wof .  6" cut squares, constructed 13 across x 16 down.  (more or less :)

Bamboo batting (cooler for hot climates)

Back is "flannel backed satin" from Joann Fabrics (also for a hot climate, the satin gives a nice cool, sensory feeling)

Pocket is repurposed from a child's pair of jeans. (likely over-alls)

Tiara embellishments from Hobby Lobby.

Eyelashes, mouth and name on the back (not shown on blog post) made with "Chenille-It" by Blooming Bias - 5/8" wide. (Etsy has the best selection of colors)

Enlarge pattern design *

HST for dragon body are 2.5" finished using this method of instructions and math.

Quilted on an HQ Sweet Sixteen

*Pattern design enlarged by a "Plotter Printer- 36 inches". (you will need to find a printer who has this machine).  The printer will need a 8x11 with your design, cut in 1/2 lengthwise.  Enlargements will come in two scrolls, 36" length of quilt. 

Bind.  Wash.  Deliver.  Loved.

Love this sassy, quirky squirt :)

100% of this quilt was made by ME :)

Disclaimer:  Any details of these instructions may be incorrect.

rosie's bicycle

 

 new crush 💕 

Research shows that when you do things with your hands, whether cooking or gardening, crafting (OR QUILTING!), happy chemicals are released in your brain. (I think that's called dopamine:)

I believe that !

There's a good chance I will be making this quilt again, so I'm documenting lots of details.

This is Rosie’s bicycle quilt.  It gives me dopamine :)

 

I've used 2 methods to enlarge a design.  The first- use a printing service that has a Large-Format Printer.  HP makes two widths, 24" and 36".  Do your math, you may need to cut your design in 1/2 lengthwise to get 2 rolls with 1/2 your design on each roll.

I was lazy and didn't want to go to a printer, so I enlarged the bicycle using the grid method many of us learned in elementary school. 

Tack the enlarged pattern onto a design board.  Lay a sheet of Golden Threads Quilting Paper over the design and trace a copy of the design.  Cut out the pieces and use them to create your templates.

To make stiff templates, iron 3 layers of freezer paper together and cut out each pattern piece.

Appliquéd the bicycle on first by cutting out the fabric pieces 1/4" larger than the template, ironing the edges under and sewing them on close the edge.  Attach the basket the same way.  Hyacinth Quilt Designs has a blog post with great pictures of this method.

Next is a base layer of leaves using the same appliqué method (top right). That method lasted about 5 minutes for me!  I quickly decided that I was NOT going to use the same appliqué method to attach all the leaves and flowers!

The raw edge appliqué method is the perfect option, creating texture.

A combination of both is nice.

This was my inspiration for the poppies…

(I didn't keep the source of these lovely poppies.  I apologize.  Please let me know if this is your creation :)

 An extra layer of batting underneath the pedals adds interest.

stats

52 x 68 washed

Bamboo batting

Back is ‘flannel backed satin’ from Joann Fabrics

Adapted from Blossoms and Spokes by Cotton Street Commons.

Background is 5" squares, 12 squares across, 16 down.

Chenille for the spokes and...

... flower centers.

Satin Backed Flannel light weight and cool on the skin.

Quilted with an HQ Sweetsixteen..

*** All applique should be sewn on with a 2.0 or smaller stitch length.  Chenille should be sewn on using a 1.0 stitch length.

1. Create background quilt with 5" squares, the size of your desired finished quilt.

2.  Using a smaller stitch length (2.0) appliqué on the basket, then bike frame and tire, turning edges under and sewing close to the edge with matching thread. 

3.  Sandwich top, batting and backing together.

4.  Quilt all background fabric (white) with a meandering (or easy) design.

5.  Apply flowers and leaves in layers.  Sew 1/8" to 1/4" from the edge, leaving enough to fray after washing.  

6.  Sew down stems of poppies.

7.  Sew on the flower centers, doubling the chenille.

8.  Carefully clip edges of all raw quilting.

9.  Bind

10.  Wash and rinse a couple of times to get all the threads out.  Dry for 6-7 minutes in the dryer on a cool setting then lay flat (I use a floor with lines I can follow)and square quilt, taping edges to the floor if necessary until dry.

Enjoy!!